Roof Installation in Glen Head, NY 11545

Copper Roof Shingles

is full of copper fans, and lovers of the copper roof are by no means an exception. There are essentially 2 various kinds of copper roof you can buy, there is the strong copper roof that consists entirely of sheet copper on your roofing system. It is very resistant to weathering and will secure your home for years but it is incredibly pricey, as you can think of. On the other hand, copper roof shingles are made by connected sheets of copper around standard asphalt shingles. All in all, the cost is likely to exercise less than a slate roofing once the copper roofing shingles have aged and been weathered they will handle the spectacular green look that only copper can create.

Can I use copper roof shingles?

One of the benefits that copper roofing shingles offer over other kinds of long lasting roofs, particularly the strong copper roofing, is that the shingles are really remarkably light and most roofing systems and structures can generally handle the load admirably. As long as you are prepared to pay roughly $4 per square foot (compared to $1 for standard asphalt however approximately $15 for strong copper) there is not likely to be any great reason why you can not utilize copper roof shingles on your roof.

Asphalt roofing system shingles will usually just last 20 years, but covered in copper sheeting the life of the asphalt shingles can quickly be extended to in between 30 and 40 years. Obviously the copper roofing system shingles themselves will just last as long as the asphalt roofing shingles that are found below the copper.

The cost of copper roofing shingles.

Copper roofing shingles are by no implies an inexpensive alternative to other styles of roof however if you like the appearance of copper and you want a longer life than asphalt shingles can use then copper roofing shingles are an excellent option. On a yearly basis copper roofing shingles do work out not total however cheap and not for the initial installation.

Standard asphalt roof shingles generally cost around $1 per square foot, whereas strong copper roofing will set you back around $15 per square foot. Copper roofing shingles are offered at around $4 to $5 per square foot so they are 4 times more costly than asphalt but considerably cheaper than a complete strong copper roofing. However, you are undoubtedly spending for the attractive appearances of a copper roofing but for less money than covering the whole roofing system in a pricey metal.

There are basically two different types of copper roofing you can purchase, there is the strong copper roofing system that consists exclusively of sheet copper on your roofing system. Certainly the copper roofing system shingles themselves will only last as long as the asphalt roofing system shingles that are discovered underneath the copper.

Copper roofing shingles are by no means an inexpensive option to other designs of roofing however if you like the look of copper and you want a longer life than asphalt shingles can provide then copper roof shingles are an outstanding alternative. Copper roof shingles are readily available at roughly $4 to $5 per square foot so they are 4 times more pricey than asphalt but substantially less expensive than a complete strong copper roofing system.

Roof Installation Contractors near Glen Head 11545

Call 888-347-0551 Now!

Our expert Roof Installation Contractors in Nassau County provide Expert Roofing Services. If you have any questions or concerns about our service area, please give us a call today. We are competitively priced in the area for Roof Installation because we are confident that you will be thrilled with how your roofing project will turn out. Again, call today to schedule a estimate for your roofing needs.

Flat Roofs

Flat roofings are a terrific way to keep a building safe from water. Understanding precisely what to do with a flat roofing will ensure you have a working roofing system that will last a very long time.

may look great, and are very typical, flat roofings do need regular maintenance and in-depth repair work in order to effectively avoid water infiltration. correctly, you'll be happy with your flat roofing for a long time.

Flat roofing systems aren't as glamorous and/or popular as its newer counterparts, such as copper, tile, or slate roofings. Nevertheless, they are simply as crucial and require even more attention. In order to avoid discarding cash on short-term repairs, you need to know precisely how flat roofing systems are created, the different types of flat roofings that are offered, and the importance of regular inspection and upkeep.

A flat roof system works by supplying a water resistant membrane over a building. It consists of several layers of hydrophobic materials that is placed over a structural deck with a vapor barrier that is generally placed between roof membrane.

Flashing, or thin strips of product such as copper, intersect with the membrane and the other building elements to prevent water infiltration. The water is then directed to drains, downspouts, and gutters by the roof's small pitch.

There are four most common kinds of flat roofing system systems. Noted in order of increasing sturdiness and expense, they are: roll asphalt, single-ply membrane, built-up or multiple-ply, and flat-seamed metal. They can vary anywhere from as low as $2 per square foot for roll asphalt or single-ply roof that is applied over and existing roof, to $20 per square foot or more for new metal roofs.

Utilized because the 1890s, asphalt roll roof generally consists of one layer of asphalt-saturated natural or fiberglass base felts that are used over roof felt with nails and cold asphalt cement and typically covered with a granular mineral surface. The seams are generally covered over with a roof compound. It can last about 10 years.

Single-ply membrane roof is the newest type of roofing product. It is often utilized to replace multiple-ply roofings. 10 to 12 year guarantees are typical, however appropriate setup is essential and maintenance is still required.

Built-up or multiple-ply roof, also known as BUR, is made from overlapping rolls of saturated or coated felts or mats that are interspersed with layers of bitumen and appeared with a granular roof sheet, tile, or ballast pavers that are utilized to secure the hidden products from the weather. BURs are developed to last 10 to 30 years, which depends on the products utilized.

Ballast, or aggregate, of crushed stone or water-worn gravel is embedded in a finish of asphalt or coal tar. Because the ballast or tile pavers cover the membrane, it makes examining and preserving the seams of the roofing hard.

Flat-seamed roofing systems have been used because the 19 th century. Made from small pieces of sheet metal soldered flush at the joints, it can last many decades depending upon the quality of the upkeep, material, and direct exposure to the aspects.

Galvanized metal does need routine painting in order to avoid rust and split joints need to be resoldered. Other metal surface areas, such as copper, can become pitted and pinholed from acid raid and generally requires replacing. Today copper, lead-coated copper, and terne-coated stainless-steel are favored as long-lasting flat roofings.

Flat roofings aren't as attractive and/or popular as its newer counterparts, such as tile, slate, or copper roofing systems. In order to prevent tossing away money on short-term repairs, you should understand precisely how flat roofing system systems are designed, the various types of flat roofings that are offered, and the significance of routine evaluation and upkeep.

There are 4 most typical types of flat roofing systems. They can vary anywhere from as low as $2 per square foot for roll asphalt or single-ply roofing that is applied over and existing roofing system, to $20 per square foot or more for new metal roofings.

Today copper, lead-coated copper, and terne-coated stainless steel are preferred as lasting flat roofs.